The stretchers of the SLIM series have been studied and projected to answer to the needs connected to the first aid and the movement in the hospital wards. The adjustable height allows to transfer easily the patient from any room to a diagnostic device, and vice versa. Light to move and easy and quick to clean: this means high quality and efficiency.

STRUCTURE

The structure is made of high thickness steel tubes, with rounded corners, bent in wide bending radius.

It is varnished with epoxy powders which are especially suited for this kind of item thanks to their high mechanical resistance and the great protection against corrosion and the chemical agents used in hospitals for sanitization and maintenance operations.

LYING SURFACE

The lying surface is divided into 4 sections of different dimensions so to enhance the patient comfort.

The sections are made of plastic, radiotransparent 10 mm-thick HPL laminate, and they are fixed to the lower frame by means of self-locking screws which disappear inside the frame.

• RADIOTRANSPARENT SURFACE L 1500 / D 445 mm
• WORKING AREA L 2000 / D 700mm

An image intensifier can be placed on either side of the stretcher.

MOVEMENTS

The backrest section is moved through a single lever on the head side; the pelvis section is fixed so to avoid abdominal compression; the legrest

section is activated by bilateral levers regulated by gas springs; the foot section is regulated by a 6-position semi-automatic double rack. The

mattress is blocked by two steel railings on the foot side.

The adjustable height is regulated by two columns moved with oil pumps. The height adjustment and Trendelenburg/Reverse Trendelenburg movements are activated by two bilateral pedals placed on both sides of the lying surface.

STANDARD EQUIPMENT

• FOUR CORNERS - covered with ABS carter - equipped with Ø 100 mm bumper wheels made in non-marking rubber and complete with supports for accessories (listed in the catalogue).
• 2 COMPASS SIDE RAILS with semi-automatic hook (length: 1425 mm);
• SAFETY BELTS;
• RUNNERS FOR X-RAY CASSETTE;
• RADIOTRANSPARENT SURFACE;
• LATERAL BUMPER BARS.

COMPULSORY COMPONENTS BY CHOICE (listed separately)

• Push handles;
• Foot panel as shelf for monitor.
• 5th wheel

The stretcher is equipped with lateral bumper bars made of oval section steel tubes varnished with epoxy powders. Hooks are placed on the outer joints of the stretcher. Bars are protected along their whole length by bumpers made of soft non-marking plastic material.

BASE

The base and the columns are protected by a carter made of thermoformed plastic material which is easy to clean; the design is also aesthetically appealing and allows to place two 3/7 liter oxygen tanks tight with belts and one case for clothes or various objects. Height from the floor 110 mm.

The base is completed with four wheels Ø 200 mm swiveling on balls bearings, one of them is directional. The wheels are made of non-marking material with plastic body, two of them antistatic.

The locking is simultaneous and activated through 4 bilateral pedals.

DIMENSIONS:

• Total area L 213 / D 83 / H 56-88 cm
• Lying surface L 191 / D 65 cm
• Inclines:

• - backrest section 90°
• - femoral section 25°
• - legrest section 18°
• - Trendelenburg / Reverse Trendelenburg (+/- 12°).

• Safe working load 300 kg.
• Patient weight 255 kg.

Made in compliance with Directive 93/42/EEC of 14/06/1993 regarding medical devices.

Class I.